Polyurea Coatings — Fast-Cure Floor & Waterproofing Membranes
Polyurea and its slower-cure cousin polyaspartic are used when downtime is the enemy: cold-store floors, plant rooms, roofs, tanks and bunds. We install spray and roller-applied systems where an epoxy would cure too slowly or fail under thermal shock.
Where this works
- Cold-store & chilled floors
- Plant rooms & mechanical spaces
- Water tanks, bunds & secondary containment
- Flat roofs & balcony waterproofing
- Loading docks & fast turnaround retail
How we install it
- 1Substrate prep
Diamond grinding or captive shot-blasting to CSP3–CSP4, edges chased, primer selected for moisture level.
- 2Primer
Epoxy primer for concrete, MMA primer for tight windows, moisture-tolerant primer for damp substrates.
- 3Main coat
Spray-applied polyurea for continuous membranes, or roller-applied polyaspartic for floor coatings. Elastomeric grades bridge hairline cracks.
- 4Detailing
Upstands, gullies, drains and penetrations are dressed with reinforcing scrim so the membrane stays continuous under movement.
Polyurea spray membranes and polyaspartic floors
Polyurea covers two quite different jobs. Polyurea spray is used for continuous membranes on roofs, tanks, bunds and secondary containment, where its elongation of up to 300 percent lets it bridge hairline cracks and stay continuous under movement. Polyaspartic coating is the roller-applied version used for floors, giving foot traffic in two to four hours. A polyaspartic garage floor is one of the options on our garage floor coating page, chosen where the garage cannot be out of use for long.
UV, temperature and where each grade fits
Aromatic polyurea is tough but chalks in sunlight, so exposed roofs and balconies need an aliphatic top coat or a polyaspartic specification. In service the systems handle minus 40 to plus 80 degrees, which is why they suit chilled floors and plant rooms where temperatures swing. Typical builds are 1 to 3 mm. Whichever grade is chosen, the substrate is diamond-ground or shot-blasted, the primer is selected for the moisture reading, and upstands, gullies and penetrations are reinforced with scrim so the membrane has no weak edge.
Polyurea coatings in the UK: getting a quote
If you are looking for polyurea coating near you, the first step is a site visit to read the substrate, the moisture level and how long the area can close. We cover Sussex, Surrey, Kent, Hampshire and London. Polyurea coatings are priced from the area, the preparation needed, the detailing at upstands and drains, and whether the job is a sprayed membrane or a rolled floor, so we survey before giving a figure. For anti-slip finishes over a polyaspartic floor, see anti-slip floor coatings.
Polyurea vs epoxy: when fast cure matters
A polyurea coating is useful when the closure window is shorter than an epoxy cure allows. Spray polyurea cures in seconds rather than the hours or days associated with epoxy, and tolerates thermal shock and low temperatures. That combination explains its use in cold stores and plant rooms, where a floor may face chilled conditions, temperature changes and little spare downtime. Fast cure does not mean every application should be sprayed. Polyaspartic is the slower-cure version of the same chemistry, giving enough working time for roller application and making it the usual choice for floors. Spray systems are used for continuous membranes and containment. Both still rely on mechanical preparation of the concrete: diamond grinding or captive shot blasting opens the surface, and the primer is selected for the slab moisture level. Edges, drains and upstands also need detailing before the coating goes down. Where the site can allow a longer shutdown, epoxy flooring remains an option; the decision follows the substrate, exposure and return-to-use window rather than cure speed alone.
Polyurea floor coating for garages and floors
For a garage floor coating, the distinction is between a sprayed polyurea membrane and the slower-cure, roller-applied polyaspartic system usually used on floors. Polyaspartic suits a shorter closure window than a conventional epoxy coating, while epoxy remains an option when the programme allows a longer cure. Fast foot-traffic cure does not automatically mean a floor is ready for a vehicle: confirm the return-to-use requirement for the specified build. Both choices still depend on mechanical preparation, moisture testing and a compatible primer. Grip, hot tyres and cleaning should be considered alongside speed.
Common pitfalls we prevent
Frequently asked
When would I use polyurea over epoxy?+
When you need to be back in service in hours instead of days, when the floor moves (crack-bridging), or when the space is too cold for epoxy to cure — polyurea is largely temperature-independent.
Is polyurea the same as polyaspartic?+
Polyaspartic is a slower-cure, roller-applicable subset of polyurea chemistry. It's what we usually use for floors; spray polyurea is used for membranes and containment.
Can you re-coat old polyurea?+
Yes — we abrade or lightly grind, apply a tie-coat and add a fresh build. Adhesion tests on a small area confirm compatibility.
Can polyurea coating be cut?+
Cured polyurea is tough and elastic, so it can be cut with a sharp blade or saw where a joint, drain or penetration needs forming, and the edge is then detailed so the membrane stays continuous.
How long does a polyaspartic floor last?+
It depends on the traffic, the preparation and how the floor is cleaned. On a properly prepared slab, a specified polyaspartic or epoxy domestic garage floor typically holds up for 10 to 15 years; heavier workshops are re-topped sooner.
How long does a polyurea floor coating last?+
Like any resin floor, it lasts as long as the bond and the wear layer allow. Correct substrate preparation, the right primer for the moisture level and reinforced detailing at edges are what decide it.
How much does polyaspartic coating cost?+
We do not publish a fixed rate, because the price depends on area, slab condition, preparation and the downtime you need. It is usually more than a standard epoxy coating because of the faster return to service. A site visit is free.
Is polyurea better than epoxy for a garage floor?+
A roller-applied polyaspartic floor, from the polyurea family, can suit a garage where a shorter cure window matters. Epoxy can suit a garage with more time available. Neither replaces slab preparation and moisture testing; compare the specified system for hot tyres, cleaning, grip and the point when vehicles can return.
Do you apply polyurea coating near me?+
We cover Sussex, Surrey, Kent, Hampshire and London. Tell us the location, substrate and intended use so we can assess whether a spray membrane or roller-applied floor system is appropriate, along with the preparation and closure window.
Free site visits across Sussex, Surrey, Kent, Hampshire and London. No obligation.
