Linen Mist N3
Within the Microcement range, Linen Mist N3 carries carrying a gentle yellow-honey lift and flax undertones — barely-warm, woven-soft in overall character. An almost-luminous shade that gives a room air without losing warmth. We see Linen Mist N3 specified most often for principal bedrooms and living rooms with mixed daylight. Borrows its character from country modern interiors and re-reads them in a modern context. Pairs naturally with rattan, jute, warm timbers and bouclé.
Best used in bedroom, living
Barely-warm, woven-soft reads its best where the light is even and natural. Below are the rooms we've installed this shade in most often.
- guest bedrooms with softer light
- open-plan reception areas
- hallways and entry sequences
Shades that sit beside Linen Mist N3
Picked by family, warmth and tonal proximity within the same range.
How Linen Mist N3 is applied
Linen Mist N3 uses the standard Microcement build. The technical specification is the same across colour — only the pigment changes.
Questions clients ask about this shade
Does Linen Mist N3 hold up in north-facing rooms?+
Yes — Linen Mist N3 carries enough warm pigment that it doesn't go flat or grey in cool daylight. The flax undertone is what stops it bleaching out.
Is Linen Mist N3 suitable for a shower or wet-room?+
Linen Mist N3 can be specified for wet-rooms with our standard microcement wet-zone build: primer, two base coats with reinforcing mesh, two finishing coats, then a tanking membrane and two coats of polyurethane sealer. The colour itself doesn't change suitability — finish and sealer do.
What does Linen Mist N3 pair with from your range?+
We most often pair Linen Mist N3 with the three closest shades in its family — see the pairings panel below. Beyond that, sits comfortably next to terracotta floors, oak joinery and unbleached cotton.
Hand-poured A5 sample posted to you within 5 working days.