Microcement Bathroom in St John's Wood
NW8 · A41 · 10 minutes from Marylebone via the A41
A microcement bathroom is a fully tanked wet-room in disguise — cementitious waterproofing membrane beneath, mineral microcement above, hospitality-grade sealer on top. No grout, no silicone, one continuous surface. undefined Microcement wet-rooms and bathrooms come through regularly.
- → microcement bathroom
- → venetian plaster
- → high end paint
Projects across Greater London typically stay in the same material family as St John's Wood. See our project gallery for recent finished work, filtered to the finish types most installed in the St John's Wood area.
- Own-team applicators — no subcontractors on your job.
- 10-year materials + workmanship warranty on qualifying installs.
- Direct-line to a senior applicator throughout the programme.
- Free St John's Wood site surveys within 5 working days.
We cover St John's Wood and all surrounding areas within a practical service radius, including Regent's Park (0.5 mi), Maida Vale (0.7 mi), Hampstead (1.5 mi). Larger projects sit us on-site for the duration rather than commuting daily.
Direct-line to our senior applicator for St John's Wood projects.
How is grouting handled — is there any?+
None — that's the whole point of a microcement wet-room. No grout lines, no silicone joints, one continuous surface across floor and walls with a hospitality-grade sealer finish.
Is the wet-room really waterproof?+
Yes — beneath the microcement finish sits a cementitious tanking layer with reinforcement tape at every corner and junction. This has been the EU-standard wet-room spec for 25+ years. Our St John's Wood wet-room installations carry a 10-year materials and workmanship warranty.
Can you re-do a small en-suite in St John's Wood without a full strip-out?+
Sometimes — if the existing tiles are sound and flat we can overlay a bonded backer and take the microcement over that. Where tiles are moving or cracked we recommend a full strip and re-tank. We tell you honestly at the survey.
- mansion flat
- period townhouse
- designer led
- homeowner family
- 1Site survey
Free on-site visit within St John's Wood. We assess the substrate, take measurements, discuss finishes and confirm what's realistic.
- 2Sample & spec
Sample board delivered — matched to your interior. Written specification and quote turned around within 3 working days.
- 3Programme
Programme agreed with you (and your designer/architect if relevant). Typical St John's Wood start window is 4–6 weeks.
- 4Application
On-site work delivered by our own trained applicators. Dust-sheeting, waste management and daily tidy included.
- 5Aftercare
Handover pack with batch numbers and aftercare instructions. 10-year materials and workmanship warranty on qualifying installs.
The short version: St John's Wood projects are usually designer led and centre on mansion flat. We survey free within the area, quote within 3 working days, and can typically start work 4–6 weeks later.
3530547779