Microcement in Bourton-on-the-Water
GL54 · A429 · 1 hour 55 minutes from London via the M40
Microcement is a 2–3 mm mineral coating applied over prepared substrate — no grout lines, no tile joints, effectively seamless across floors, walls and wet-rooms. It's the most versatile finish in our catalogue. Across the GL54 postcode district, Bourton-on-the-Water projects centre on characteristic buttermilk Cotswold-stone houses and cottages. The demand here comes overwhelmingly from homeowners renovating around a working household, not empty-property new-builds. Bourton-on-the-Water sits on the A429, 1 hour 55 minutes from london via the m40. From here we cover Bibury (9 mi) and Stow-on-the-Wold (4 mi) and out to Northleach (5.5 mi) inside our standard service radius. Microcement floors are the workhorse of our specifications here. The 'Venice of the Cotswolds' — Bourton's low-lying stone bridges and stream-side cottages mean damp management is a constant, and our limewash specifications here always include full lime-plaster substrate review.
- cotswold stone
- listed farmhouse
- homeowner family
- hospitality
- 1Site survey
Free on-site visit within Bourton-on-the-Water. We assess the substrate, take measurements, discuss finishes and confirm what's realistic.
- 2Sample & spec
Sample board delivered — matched to your interior. Written specification and quote turned around within 3 working days.
- 3Programme
Programme agreed with you (and your designer/architect if relevant). Typical Bourton-on-the-Water start window is 4–6 weeks.
- 4Application
On-site work delivered by our own trained applicators. Dust-sheeting, waste management and daily tidy included.
- 5Aftercare
Handover pack with batch numbers and aftercare instructions. 10-year materials and workmanship warranty on qualifying installs.
Programmes for Bourton-on-the-Water typically start 4–6 weeks after quote approval.
How long does a typical microcement project in Bourton-on-the-Water take?+
For a standard Bourton-on-the-Water residential job — kitchen floor plus a wet-room — figure 8–12 working days on site including surface prep, application and full seal. Whole-house schemes 3–5 weeks depending on square footage.
What's the price range for microcement in Bourton-on-the-Water?+
Guide pricing across Bourton-on-the-Water sits between £180–£320 per m² supplied and applied, depending on substrate condition, colour and sealer specification. Full quotes are always specific to the survey — we don't work off ballparks alone.
Do you work under listed-building consent in Bourton-on-the-Water?+
Yes — a meaningful share of our work in the Bourton-on-the-Water area is on listed properties, and we're used to supplying the finish schedule, material data sheets and application methodology that go into the consent bundle for the heritage architect.
- → limewash heritage
- → microcement floor
- → high end paint
Projects across Gloucestershire typically stay in the same material family as Bourton-on-the-Water. See our project gallery for recent finished work, filtered to the finish types most installed in the Bourton-on-the-Water area.
- Own-team applicators — no subcontractors on your job.
- 10-year materials + workmanship warranty on qualifying installs.
- Direct-line to a senior applicator throughout the programme.
- Free Bourton-on-the-Water site surveys within 5 working days.
We cover Bourton-on-the-Water and all surrounding areas within a practical service radius, including Stow-on-the-Wold (4 mi), Northleach (5.5 mi), Bibury (9 mi). Larger projects sit us on-site for the duration rather than commuting daily.
The short version: Bourton-on-the-Water projects are usually homeowner family and centre on cotswold stone. We survey free within the area, quote within 3 working days, and can typically start work 4–6 weeks later.
320159619