For homeowners

Microcement for Homes and Renovations

In a home the technical questions are only half the job. The other half is whether you can still get to the kettle, how much dust you are living in, and whether the dog will scratch it. That is what this page answers.

Talk to a specialist about this project
Free site visit across Sussex, Surrey, Kent, Hampshire & London. Family-run, based in Hurstpierpoint.

Where this works

  • Kitchen extensions where the floor runs to the bifolds
  • Family bathrooms and en suites
  • Hallways from the front door through to the back
  • Utility rooms, boot rooms and dog washing areas
  • Garden rooms and loft conversions

How we install it

  1. 1
    Plan the household first

    Before we talk build up we agree which rooms come out of use and when, where the washing machine goes, and which days you cannot have solvent smell in the house.

  2. 2
    Protect and isolate

    Zip walls, taped protection on routes, extraction on every grinder. The prep day is the dusty one and we plan it for a day you can be out if you would rather.

  3. 3
    Apply around family life

    Bathrooms are done in one continuous run so you are not without a shower longer than the programme says. Kitchen floors are sequenced so the appliances go back on a known date.

  4. 4
    Hand over properly

    You get the sealer sheet, the cleaning products that suit it, and a straight answer on what will and will not mark it.

Common pitfalls we prevent

Booking the floor before the kitchen fitters have finished, so trades walk over a curing sealer
Under running the drying days on a winter job in an unheated extension
Buying supermarket floor cleaner with limescale remover in it, the single most common cause of dull patches

Frequently asked

Can we stay in the house during the work?+

In most homes yes. We work room by room, protect the routes and use extraction on the dusty stages. The only real constraint is the sealer days, when the room needs to stay empty and ventilated.

Is microcement good with children and dogs?+

It is a hard mineral surface with no grout to stain, which suits family life. Claws can leave fine marks in a satin sealer over time, and those are dealt with by a maintenance coat rather than a repair.

How much disruption is a bathroom?+

Around four to six working days from first prep to sealed, with the shower out of use for seven days from the last coat. There is no tile strip out if the existing tiles are sound, which usually saves two days and a skip.

Does it add much height to the floor?+

Two to three millimetres plus primer, so doors rarely need trimming and thresholds to carpet or timber stay simple.

What if we damage it later?+

Small chips and scratches are repairable in place. We keep a record of your pigment and batch so a repair or a later extension can be matched rather than guessed.

Free site visits across Sussex, Surrey, Kent, Hampshire and London. No obligation.