Microcement Table and Furniture Finishes
Microcement is not only for floors and walls. A microcement table, bench, plinth or built-in unit can carry the same seamless, mineral finish as the rest of a room. Furniture brings its own challenges: edges are handled constantly, tops take hot cups and spills, and the base must not flex. We look at the piece and how it will be used, then plan the substrate, edges and sealer around it.
Where this works
- Dining and coffee tables
- Built-in benches and window seats
- Display plinths and retail counters
- Bedside units, shelves and vanity tops
How we install it
- 1Check the piece will not flex
Microcement is a thin coating, so it relies on the base being rigid. A table top that bends under load or a joint that moves will crack the finish. We assess whether an existing piece is suitable or whether a new substrate should be built. Moisture-resistant board is preferable for anything near water.
- 2Prepare and detail the edges
Edges and corners take most of the knocks on furniture. They are formed and reinforced before the decorative coats, and the profile, square or softly rounded, is agreed at the start. Joints in the substrate are bridged with mesh so they do not show through. Fixings and fittings are planned before coating.
- 3Apply microcement in thin layers
Base and finishing coats are applied by trowel, then sanded between layers to build a smooth, even surface. The colour and degree of movement are agreed on a sample. The finish wraps the top, edges and sides so the piece reads as a single solid object.
- 4Seal for everyday use
The sealer is what protects the surface from spills and stains. A dining or coffee table needs a more protective system than a decorative plinth. We explain the curing time before use and which cleaning products are suitable. Coasters and mats help on tables that take hot dishes and drinks.
Microcement furniture alongside worktops
Microcement furniture often sits with a microcement kitchen worktop or island, so the same colour and finish runs through the space. Worktops have their own requirements for heat, knives and daily food preparation, which our microcement worktops page explains.
Is a microcement table practical?
With a rigid base and a suitable sealer, a microcement table is easy to wipe and can handle normal use. It is a hand-applied, mineral surface, so it develops character over time and is not as hard as stone. Avoid dragging rough objects across it, and wipe up spills such as red wine or oil promptly.
What affects the cost?
The size of the piece, whether a new substrate is built, the number of edges and faces, the finish and sealer chosen, and whether the work is done on site or in a workshop all affect the price. A single coffee table is a different job from built-in seating.
Common pitfalls we prevent
Frequently asked
Can you put microcement on a table?+
Yes, if the table top is rigid and stable. Flexible or moving bases must be replaced or reinforced first, and the surface is sealed for use.
Is a microcement table heat resistant?+
It tolerates normal everyday use, but hot pans and dishes should go on mats to protect the sealer.
Can microcement furniture match my floor?+
Yes. The colour and finish can be matched on a sample so furniture and floors read as one material.
How long does it take?+
It depends on preparation, the number of layers and the sealer curing time before the piece is used.
Free site visits across Sussex, Surrey, Kent, Hampshire and London. No obligation.